Medium Tank Mark A

Whippet

1/72nd Scale

Assembly Instructions:

Fit the deflector plannel into the side of the track.

Glue the  other side of the track into place.

Glue the front top track piece into place.

Place the lower front track piece into place and duplicate the process for the other track.

Glue the floor to the body.

Glue the forward track supports into place and the bottom of the armored fuel tank into the tank.

Glue the fuel tank to the front of the body, the floor of the fighting compartment to the body and the armor plate to the rear of the body.

Glue the front of the fighting compartment to the floor.  Place the door into postion.

Glue the rear of the fighting compartment into place leaving the door unglued so it can be opened.

Glue the top hatch to the top of the fighting compartment roof.    Glue the vents and exhaust pipes to each side of the engine compartment.

Glue the machine guns to the ball mounts and the ball mounts to the fighting compartment sides.

Glue the tracks to the rear axles and the front track supports.   Make sure that the defector plates slope outward from top to bottom.

Glue the circular axle covers into the tracks over the rear axles.  

Paint.  

This page created 06/19/03  Modified 06/19/03 © Reviresco 2001